WAGO 2-Pin Lever-Lock Wire Connector (32A, 450V) | Signal-Link Series @ EV2W
WAGO 2-Pin Lever-Lock Wire Connector (32A, 450V) | Signal-Link Series @ EV2W
Brand: Generic
Couldn't load pickup availability
Low stock: 4 left
Eliminate Electrical Failure with Gas-Tight Lever Connections
Are your electrical joints wrapped in messy tape or secured by screws that eventually vibrate loose? In high-vibration environments like electric scooters or industrial panels, a loose wire isn't just a nuisance—it's a fire hazard. The Signal-Link Series @ EV2W uses professional lever-actuated spring technology to provide a vibration-proof, maintenance-free connection for any two-wire circuit.
Troubleshooting: Why do my wire joints get hot or melt?
Heat is caused by resistance. When wires are simply twisted together or held by a loose screw, the contact area is small, leading to "arcing." The Signal-Link Series solves this with High-Tension CAGE CLAMP Technology, vetted to wrap around the conductor and maintain a high-pressure, gas-tight seal that never loosens, even on the bumpiest Indian roads.
Vehicle & Electrical Compatibility
This 2-pin high-current connector is technician-vetted for:
- EV Signal Lines: Perfect for joining throttle wires, brake-cut sensors, and ignition lines.
- High-Power Lighting: Safely handles 32A loads for LED fog lights, horns, and accessory power distribution.
- Home & Industrial: Ideal for junction boxes, ceiling fans, and DIY home automation projects.
- Local Pickup: Available for fast India-wide shipping or same-day pickup at our Jabalpur EV center.
The EV2W Vetting Standard
- 105°C Thermal Rating: We verified the transparent polycarbonate housing. It is engineered to stay rigid and safe even when mounted near hot motor controllers or battery packs.
- Zero-Tool Installation: Vetted for workshop speed. Simply strip 11mm, lift the orange lever, insert the wire, and snap it shut. No soldering or crimping required.
- Universal Conductor Support: Vetted to securely grip solid, stranded, and even ultra-fine flexible copper wires from 0.2 to 4.0 mm².
Technical Specifications
- Configuration: 2-Pole (Independent connections)
- Current Rating: 32A (High Power)
- Voltage Rating: 450V AC/DC
- Housing: Clear/Transparent for 100% visual inspection
Signal-Link Series vs. Traditional Wire Joints
| Feature | Signal-Link Series @ EV2W | Generic Screw / Tape Joints |
|---|---|---|
| Installation Time | ✅ 5 Seconds (Tool-Free) | ❌ 2-3 Minutes (Tools Needed) |
| Vibration Proof | ✅ Yes (Spring Loaded) | ❌ No (Screws Back Out) |
| Reusability | ✅ 100% Reusable | ❌ One-Time / Messy Removal |
The Signal-Link 2-Pin WAGO Connector @ EV2W is the ultimate "set-and-forget" tool for your electrical toolkit. Whether you are repairing a 72V scooter harness or installing a home security system, our technicians recommend these for a factory-standard finish. Buy online today for a more secure connection.
Product additional information
Product additional information
Whether you're working on lighting circuits, intercom systems, control panels, home appliances, or electrical equipment, this connector ensures strong, vibration-resistant, and secure connections that meet professional standards.
Fast, Tool-Free Wiring with Lever Technology One of the standout features of the WAGO 2-Pin Connector is its intuitive lever design, making wiring quick, safe, and error-free. No screwdrivers, crimping tools, or ferrules are required.
Installation is simple:
- Strip the conductor to 11 mm
- Lift the orange lever
- Insert the wire
- Close the lever
The internal spring clamp automatically applies optimal pressure, creating a secure and reliable electrical connection.
This efficient process significantly reduces installation time and labor costs while ensuring consistent connection quality — especially valuable for repetitive wiring tasks. Compatible with Multiple Conductor Types
The WAGO 2-Pin Connector supports a wide range of conductor types:
- Solid conductors
- Stranded conductors
- Fine-stranded conductors (no ferrules required)
Conductor range: 0.2 mm² to 4 mm²
This versatility makes it suitable for lighting installations, junction boxes, control panels, and general electrical wiring applications.
Compact Design for Tight Spaces
Modern installations often require space-efficient components. With compact dimensions of approximately 18.8 × 8.4 × 13.5 mm (may vary slightly by model), the 2-pin connector easily fits into:
- Junction boxes
- Flush-mounted wall boxes
- Distribution boards
- Control cabinets
Despite its small size, it delivers reliable electrical performance without compromising safety.
High Electrical Ratings for Reliable Performance
The WAGO 2-Pin Connector is rated for:
- Rated Voltage: 450V
- Rated Current: 32A
These strong electrical ratings make it suitable for residential wiring as well as light industrial applications.
Its dependable performance under load makes it a preferred
choice for electricians, panel builders, and installers.
Transparent Housing for Easy Inspection
The connector features a transparent housing that allows
visual confirmation of proper wire insertion.
This helps to:
- Reduce wiring errors
- Improve installation safety
- Simplify inspection and troubleshooting
The visible orange levers allow quick identification during
installation and maintenance.
Ideal Applications
The WAGO 2-Pin Lever Connector is widely used in:
- Electrical wiring & power distribution
- Lighting fixtures & circuits
- Junction box connections
- Home appliance wiring
- Control panel wiring
- Retrofit and maintenance work
Its professional-grade construction makes it suitable for both new installations and repair projects.
Key Features at a Glance
- Model: WAGO 2-Pin Lever Connector
- Type: 2-Way Splicing Connector
- Rated Voltage: 450V
- Rated Current: 32A
- Conductor Range: 0.2 mm² – 4 mm²
- Connection Technology: Lever-Actuated Spring Clamp
- Strip Length: 11 mm
- Tool-Free Installation: Yes
- Maintenance-Free: Yes
- Compact Design: Space-saving
Product Details
- Model Number:2 pin connector
- Housing Material: ABS
- Material: Plastic
- Product name:221 3 conductor wire connector
- Application: solderless quick wiring electrical
connector - Color: transparent & Orange
- Weight: 50 g
- Dimensions: 18.8 × 8.4 × 13.5 mm
- Professional Quality You Can Trust
The WAGO 2-Pin Connector delivers fast, secure, and professional-grade electrical connections. Its ease of use, compact size, and reliable spring clamp technology make it an essential component for electricians, contractors, and DIY users.
Whether you're joining two wires in a lighting circuit or making secure panel connections, the WAGO 2-Pin Connector ensures consistent performance, improved safety, and long-term reliability.
Choose the WAGO 2-Pin Connector for dependable wire connections — every time
Marketed by:
Happy Mart
India’s trusted supplier of quality EV spare parts and accessories for electric scooters, loaders, and utility vehicles
Shipping
Shipping
We ship products across India through authorized third-party courier partners. Shipping availability may vary depending on serviceable PIN codes
Shipping charges are clearly displayed at checkout in accordance with applicable e-commerce transparency requirements.
- Free shipping on prepaid orders above ₹600/-
- ₹80/- shipping charge for prepaid orders below ₹600/-
- ₹100/- shipping charge for Cash on Delivery (COD) orders above ₹600/-
- ₹150/- shipping charge for Cash on Delivery (COD) orders below ₹600/-
Shipping charges are non-refundable unless the product
delivered is defective, damaged, or incorrect.
For detail, please refer to our shipping policy in attached link
Return & Refund
Return & Refund
Return & Refund rules
- Returns accepted withing 3 days of Delivery
- Customer shall bear cost of return shipping.
- Orders can be cancelled before dispatch. For Cancellations, please contact us via contact us link
- Shipping and handling charges are non-refundable unless the return is due to our mistake
- Refund will be processed within 5–7 business days.
- Amount will be credited to the original mode of payment.
- For Cash on Delivery (COD) orders, refund will be processed via bank transfer (customer must provide bank details).
For details please refer to our Return & Fund policy at below link
